Huawei 2288H v5 FusionServer Pro – Specification

Form factor

2U rack server

Chipset

Intel^® C621/Intel^® C622

Processors

Supports one or two processors.

• Intel^® Xeon^® Scalable (Skylake and Cascade Lake) processors

• Built-in memory controller and six memory channels
• Built-in PCIe controller, supporting PCIe 3.0 and 48 lanes per processor
• Two UPI buses between processors, providing up to 10.4GT/s transmission per channel
• Up to 28 cores (2.7 GHz)
• Max. 3.8 GHz (four cores)
• Min. 1.375 MB L3 cache per core
• Max. 205 W TDP

Memory

Supports 24 memory modules of the following types:

• Up to 24 DDR4 memory modules
• Max. 2933 MT/s memory speed
• RDIMM and LRDIMM support
• The DDR4 memory modules of different types (RDIMM and LRDIMM) and specifications (capacity, bit width, rank, and height) cannot be used together.

Storage

Supports a variety of drive configurations. For details, see Drive Configurations.

• Supports two M.2 SSD modules.

  The drive letter of the M.2 SSD module can be set to Sda by changing the grub parameter only when the M.2 SSD module is used with the SR130, SR130-M, or SR760IT-M RAID controller card. If the RAID controller card of any other type is used, the drive letter cannot be Sda on the OS.

  NOTE:

  • The M.2 SSD module is used only as the boot device when the OS is installed. Small-capacity (32 GB or 64 GB) M.2 SSDs do not support logging due to poor endurance. If a small-capacity M.2 SSD is used as the boot device, a dedicated log drive or log server is required for logging. For example, you can dump VMware logs in either of the following ways:
    • Redirect /scratch. For details, see https://kb.vmware.com/s/article/1033696.
    • Configure syslog. For details, see https://kb.vmware.com/s/article/2003322.

  • The M.2 SSD cannot be used to store data due to poor endurance. In write-intensive applications, the M.2 SSD will wear out in a short time.

    Use enterprise-level high endurance (HE) SSDs or HDDs for data storage.

  • The M.2 SSD is not recommended for write-intensive service software due to poor endurance.
  • Do not use the M.2 SSD as the cache.
• Supports hot swap of SAS/SATA/NVMe drives.

  NOTE:

  The NVMe drives support:

  • Surprise hot swap if the VMD function is enabled and the latest Intel VMD driver is installed.
  • Orderly hot swap if the VMD function is disabled.
• Supports a variety of RAID controller cards. Use the Intelligent Computing Compatibility Checker to obtain information about the specific RAID controller cards supported.
  • The RAID controller card supports RAID configuration, RAID level migration, and drive roaming.
  • The RAID controller card does not occupy a standard PCIe slot.

  For details about the RAID controller card, see Huawei V5 Server RAID Controller Card User Guide.

• Supports SAS HBA cards or SAS RAID controller card (with 1, 2, or 4 GB cache) to improve storage performance and data security.

Network

Supports expansion capability of multiple types of networks.

• LOM
  • Supports two 10GE optical ports and two GE electrical ports via the NIC chip integrated on the mainboard.
  • Supports two 10GE electrical ports and two GE electrical ports via the NIC chip integrated on the mainboard.
  • The LOM ports support NC-SI, WOL, and PXE.
• FlexIO card
  • Supports on-demand configuration.
  • Supports a variety of FlexIO cards. Use the Intelligent Computing Compatibility Checker to obtain information about the specific FlexIO cards supported.

I/O expansion

10 PCIe 3.0 slots:

• One slot dedicated for a RAID controller card, one dedicated for a FlexIO card, and eight for standard PCIe cards.

  For details, see PCIe Slots and PCIe Slot Description.

• Support Huawei proprietary PCIe SSD cards to bolster I/O performance for applications such as searching, caching, and download services.
• Supports P4, P100, and M10 GPU cards.

Ports

Supports a variety of ports.

• Ports on the front panel:
  • Two USB 2.0 ports
  • One USB 3.0 port
  • One DB15 VGA port

  NOTE:

  For the server that uses 12 x 3.5″, 20 x 2.5″ (8 x SAS/SATA + 12 x NVMe) or 25 x 2.5″ drive configuration, the front panel provides only two USB 2.0 ports.

• Ports on the rear panel:
  • Two USB 3.0 ports
  • One DB15 VGA port
  • One RJ45 serial port
  • One RJ45 system management port
  • Two GE electrical ports
  • Two 10GE electrical ports or 10GE optical ports
• Built-in ports:
  • One USB 3.0 port
  • Two SATA ports

Video card

An SM750 video chip with 32 MB display memory is integrated on the mainboard. The maximum display resolution is 1920 x 1200 at 60 Hz with 16 M colors.

System management

• UEFI
• iBMC
• NC-SI
• Integration with third-party management systems

Security features

• Power-on password
• Administrator password
• TCM (only in China)/TPM
• Secure boot
• Front bezel (optional)

Temperature

• Operating temperature: 5°C to 45°C (41°F to 113°F) (ASHRAE Classes A2 to A4 compliant)
• Storage temperature: –40°C to +65°C (–40°F to +149°F)
• Long-term storage temperature: 21°C to 27°C (69.8°F to 80.6°F)
• Maximum temperature change rate: 20°C/h (36°F/h)

Relative humidity (RH, non-condensing)

• Operating humidity: 8% to 90%
• Storage humidity: 5% to 95%
• Long-term storage humidity: 30% to 69%
• Maximum change rate: 20%/h

Air volume

≥ 204 cubic feet per minute (CFM)

Altitude

• Operating altitude ≤ 3050 m (10006.44 ft)
  • When the server configuration complies with ASHRAE Class A2 standards and the altitude is above 900 m (2952.76 ft), the highest operating temperature decreases by 1°C (1.8°F) for every increase of 300 m (984.24 ft).
  • When the server configuration complies with ASHRAE Class A3 standards and the altitude is above 900 m (2952.76 ft), the highest operating temperature decreases by 1°C (1.8°F) for every increase of 175 m (574.14 ft).
  • When the server configuration complies with ASHRAE Class A4 standards and the altitude is above 900 m (2952.76 ft), the highest operating temperature decreases by 1°C (1.8°F) for every increase of 125 m (410.1 ft).

• HDDs cannot be used at an altitude of over 3000 m (9842.4 ft).

Corrosive gaseous contaminant

Maximum corrosion product thickness growth rate:

• Copper corrosion rate test: 300 Å/month (meeting level G1 requirements of the ANSI/ISA-71.04-2013 standard on gaseous corrosion)
• Silver corrosion rate test: 200 Å/month

Particle contaminant

• The equipment room environment meets the requirements of ISO 14664-1 Class 8.
• There is no explosive, conductive, magnetic, or corrosive dust in the equipment room.

Acoustic noise

The declared A-weighted sound power levels (LWAd) and declared average bystander position A-weighted sound pressure levels (LpAm) listed are measured at 23°C (73.4°F) in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

• Idle:
  • LWAd: 5.64 Bels
  • LpAm: 42.2 dBA
• Operating:
  • LWAd: 6.08 Bels
  • LpAm: 46.8 dBA

Dimensions (H x W x D)

• Chassis with 3.5″ drives: 86.1 mm x 447 mm x 748 mm (3.39 in. x 17.60 in. x 29.45 in.)
• Chassis with 2.5″ drives: 86.1 mm x 447 mm x 708 mm (3.39 in. x 17.60 in. x 27.87 in.)

Installation space

• Requirements for cabinet installation:

  Cabinet compliant with the International Electrotechnical Commission (IEC) 297 standard

  • Cabinet width: 482.6 mm (19 in.)
  • Cabinet depth ≥ 1000 mm (39.37 in.)
• Requirements for guide rail installation:
  • L-shaped guide rails: apply only to Huawei cabinets.
  • Static rail kit: applies to cabinets with a distance of 543.5 mm to 848.5 mm (21.40 in. to 33.41 in.) between the front and rear mounting bars.
  • Ball bearing rail kit: applies to cabinets with a distance of 610 mm to 914 mm (24.02 in. to 35.98 in.) between the front and rear mounting bars.

Weight in full configuration

• Maximum net weight:
  • Server with 8 x 2.5″ front drives + 4 x 2.5″ rear drives: 25.1 kg (55.35 lb)
  • Server with 12 x 3.5″ front drives + 4 x 3.5″ + 4 x 2.5″ rear drives: 34.1 kg (75.19 lb)
  • Server with 24 x 2.5″ front drives + 4 x 2.5″ rear drives: 29.4 kg (64.83 lb)
  • Server with 25 x 2.5″ front drives + 2 x 3.5″ + 4 x 2.5″ rear drives: 30.5 kg (67.25 lb)
• Packaging materials: 5 kg (11.03 lb)

Power consumption

The power consumption parameters vary with the configuration. Use the Huawei Server Power Calculator to obtain specific information.